How does cattle housing influence performance?

Whether your cattle have access to rubber mats, straw or concrete when they want to take a rest can have a significant impact on their overall performance, according to a Teagasc study.

Teagasc researchers looked at housing with concrete slatted floors, different rubber mat types overlaid on concrete slats, and strawbedded flooring, with a focus on finishing steers.

Teagasc business and technology adviser David Hallissey presented the results at the BEEF2026 open day at Teagasc Grange last week, outlining the performance benefits of rubber mats for 590kg steers during the finishing period.

He told Agriland: "Straw bedding didn't show any performance gain over your concrete slats."

The trial found that cattle finished on mats over 120 days had a higher average daily gain (ADG) of 0.18kg/DM compared to concrete.

Cattle on rubber mats spent nearly one extra hour lying down, and had an 11kg heavier carcass-weight on average with no increase in feed intake.

David Hallissey presenting research on housing influence on cattle.
David Hallissey presenting research on housing influence on cattle.

Cleanliness was also measured and interestingly, concrete slats showed the highest cleanliness.

Straw bedding had the lowest cleanliness despite regular removal and replenishing of straw and a 5m² lying space allocation, compared to 3m² for concrete and rubber mats.

Space requirements

Teagasc researchers also trialed how space allowance in a pen can impact cattle performance.

Teagasc recommends that finishing cattle should have a 2.2-2.7m² space allocation or 4m² if housed on straw.

For the trial, cattle were housed in pens with space allocations of 2m², 3m², and 4m².

The results show that finishing cattle allocated 3m² lying space compared to 2m² were 240kg of carcass-weight better off or over €1,500 more profitable at €6.60/kg.

Cattle on 2m² saw an ADG of 200-600g lower.

Hallissey pointed to the significant performance improvement when cattle are given adequate lying space but also noted that there was no "significant difference" when space allocations went beyond 3m².

He advised farmers to also consider feeding space as it often falls below recommended allocations.

Teagasc recommends that when feeding ad-lib silage, finishing cattle require 400-500mm/head.

If feeding restricted silage, this increases to 600-650mm/head to prevent cattle from failing to thrive.

More details on the research presented at BEEF2026 on this and a wide range of other topics relating to beef production are available on Agriland's BEEF2026 Knowledge Hub.

Related Stories

Share this article

More Stories